EDWL Quard Band Signal Repeater
Product Introduction
Single band repeater, dual band repeater, triband repeater, quad band and five band repeater Isolation Inspection. Input&Output Signal Strength Indication. Manual Gain Adjustment. Automatic Gain Control (AGC). Smart Mode. Auto Shut Down.
PRODUCT
Parameters | Uplink | Downlink | |
Frequency Range | EGSM (Band 8) | 880-915MHz | 925-960MHz |
DCS (Band 3) | 1710-1785MHz | 1805-1880MHz | |
WCDMA (Band 1) | 1920-1980MHz | 2110- 2170MHz | |
LTE2600 (Band 7) | 2500-2570MHz | 2620-2690MHz | |
Operation Bandwidth (-3dB) | Wide Band | ||
Maximum Gain | ≥70dB | ≥75dB | |
Output Power | ≥17dBm | ≥23dBm | |
AGC (Automatic Gain Control) | ≧25dB | ||
Spurious Emission | 9KHz~1GHz | ≦ -36dBm | |
1GHz~12.75GHz | ≦ -30dBm | ||
Noise Figure | ≤ 6dB | ||
VSWR | ≦2.2 | ||
Group Delay | ≤1μs | ||
LED Alarm | Power LED | DC ON/OFF | |
AGC LED | GREEN @ Normal, Red @ ALC 10dB, | ||
Output signal strength | Shown output signal strength with numerical number | ||
RF Connector | N-Female | ||
Impedance | 50Ω | ||
Power Consumption | ≤40W | ||
Power Supply | Input: AC 110~240V; Output: DC12V/10A | ||
Operating Temperature | -10℃~50℃ | ||
Environment Conditions | IP40 | ||
Dimensions (D x W x H ) | 373*228*72.8mm | ||
Weight | ≤10KG | ||
ISO: When AGC control over 25dB range, the ISO will turn to RED, and repeater will shut off | |||
Smart Mode: Automatically adjust the gain in both links according to the specific environment. | |||
Location：